Easing the pain of SWD on modern DPS:es

IMG_0501-225x300

Johan Kanflo writes:

On newer DPS:es, the SWD connector is a JST-GH (1.25mm spacing that is) which translates to “really tiny”. The annular rings where you need to apply solder and heat for adding wires are even smaller. This is why the OpenDPS SWD Bottle is handy. Add three P50-E2 pogo pins, and connect to your favourite SWD debugger.

See the full post on his blog.

Hacking the DPS5005

pics-OpenDPS-600

Johan Kanflo’s OpenDPS project, a free firmware replacement for the DPS5005:

This write up of the OpenDPS project is divided into three parts. Part one (this one) covers reverse engineering the stock firmware and could be of interest for those looking at reverse engineering STM32 devices in general. Part two covers the design of OpenDPS, the name given to the open DPS5005 firmware. Part three covers the upgrade process of stock DPS:es and connecting these to the world. If you only want to upgrade your DPS you may skip directly to part three.

More details at Johan Kanflo’s blog.